Sigma Labs Launches PrintRite3D Production Series for Metal 3D Printing Quality Assurance

IMTS

Share this Article

This week, AM quality assurance software developer Sigma Labs, Inc. launched the new Production Series of its PrintRite3D software. 3D printing is fairly responsive in a crisis situation, as it is a more agile and rapid manufacturing method and can be used to build products in close proximity to where they are needed. That’s why it was serendipitous to launch the series now – many in the industry are predicting that we will see a drastic uptick in 3D printed metal parts as the US manufacturing industry reacts to the COVID-19 pandemic.

Manufacturers use long, complex supply chains, and the PrintRite3D Production Series can help cut down the design and development process, in addition to speeding up 3D printing qualification. Not only does PrintRite3D offer real-time, remote monitoring from anywhere in the world, but the new series is also a new Production Dashboard, which provides managers with important AI-driven metrics and, according to Sigma, “actionable information” during 3D print jobs.

“Sigma Labs has a rich history of innovation. PrintRite3D® Production Series is the culmination of years of internal research and development and radical collaboration with our customers,” said Mark K. Ruport, the Executive Chairman of Sigma Labs. “We believe it will be seen as a major advancement for the additive manufacturing industry just as 3D printing of metal parts will be tested and challenged to fulfill the promise of being the next revolution in manufacturing.”

Sigma is unique, as its technology can work with most major 3D metal printer brands. This is especially helpful now during the worldwide COVID-19 crisis, as manufacturers are in need of faster production alternatives like 3D printing. Because PrintRite3D software is machine-agnostic, manufacturers can achieve standardized QA processes, even with a supply chain that uses different 3D printers.

“Bringing Sigma’s technology down to the manufacturing floor to be used by production managers to monitor the 3D printing process is a major step forward for the AM industry. PrintRite3D® Production Series addresses one of the critical barriers of the industrialization of additive manufacturing and puts highly sophisticated tools in the hands of the printer operators. Additionally, the fact that Sigma’s technology can be used today on 3D printers from multiple manufacturers to provide a consistent standard of quality assurance, allows manufacturers to deploy the technology throughout their supply chain,” said Dr. Prveen Bidare, Technical Research Officer in Hybrid Manufacturing at the University of Birmingham.

The intuitive dashboard that comes with the new PrintRite3D Production Series is an extremely helpful tool for production managers, as it offers actionable information and “in-process quality metrics,” such as automated In-process Quality Metric (IPQM) based alerts. These make the manufacturing process more efficient, as production managers can use “custom metric thresholding” to make decisions about part and process quality. The process engineer can rest assured that the process was in control, and production managers will know part yield predictive performance.

The PrintRite3D Production Dashboard also comes with high-resolution IPQM medical-grade 3D forensic analysis, which gives the build process a “level of granularity” that wasn’t possible before. This feature is used to investigate process engineering part anomalies – the process engineer can use the dashboard to gain a better understanding of 3D anomalous IPQM signatures and their specific morphologies, which will ensure continuous process improvement. In the dashboard, the IPQM is also trained with machine learning algorithms through “micro CT-based on standard additive defects,” so it’s easier to spot and classify different porosity modes, like Key Hole, Foreign Inclusions, Lack of Fusion, and Spherical Porosity. This means that process engineers can qualify and certify IPQM as an alternate choice to micro CT, which monitors predictive defect modes in real time – lowering the burden of post process measurement.

Discuss this story and other 3D printing topics at 3DPrintBoard.com or share your thoughts in the Facebook comments below.

(Source/Images: Sigma Labs)

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...